Rely on the expert in desiccants like silica gel and molecular sieve for pharmaceutical, healthcare and medtech applications

The use of desiccants in pharmaceuticals and diagnostics requires compliance with the highest quality standards. Our desiccant products meet the global requirements, especially those of the European Union and the US Food and Drug Administration (FDA).

For more than 70 years, Sanner has been manufacturing high-quality packaging systems with desiccants for the pharmaceutical, healthcare and medtech industries. These can be packaging solutions with integrated desiccants as in our Sanner effervescent tablet packaging, as well as desiccant packs such as AdPack®, or capsules such as AdCap®, which are added to the container. 

What is a desiccant?

A desiccant is a substance that can bind water or gases chemically or physically. Common solid desiccants such as silica gel, bentonite and molecular sieve physically bind water from the atmosphere by adsorption. Liquid desiccants bind water chemically, i.e. the water is adsorbed. 

Due to their porosity, solid desiccants have a large specific surface and can bind up to 40% of their own weight in water. In addition, many desiccants can be regenerated by heating. The larger the specific surface of solid desiccants, the more water can be bound. In addition, the pore diameter of the desiccants has an influence on which gases can be adsorbed. The larger the pore diameter, the more different gases can be bound by the desiccants. Solid desiccants are divided into microporous (pore radii <1 nm), mesoporous (pore radii 1-25 nm) and macroporous (pore radii >25 nm) structures. 

Silica gel is the most widely used desiccant

At Sanner, we use two types of solid desiccants: silica gel and molecular sieves. Both types of desiccants are hygroscopic, i.e. they bind (adsorb) moisture or water vapor and thus keep it away from the packaged contents.

Silica gel is a colorless and odorless drying agent, which is usually processed into a pearl-shaped structure. The surface of silica gel is covered with silanol groups to which water molecules can bind by means of hydrogen bridge bonds. Silica gel is resistant to most substances except strong alkalis and hydrofluoric acid. It does not develop vapors and does not react with metal. The water absorption capacity of silica gel increases with increasing relative ambient humidity. However, silica gel only adsorbs water from an ambient relative humidity of about 10%. Silica gel is the considerably more cost-effective type of desiccant and ideal if a certain residual moisture (approx. 10%) is desired or permissible in the container (e.g. for gelatin capsules).

The second type of desiccant used by Sanner is molecular sieve. Molecular sieves are aluminum silicates and can be obtained by decomposition or synthesis. Like silica gel, molecular sieves are processed into powder or bead form. Unlike silica gel, molecular sieves can bind water molecules regardless of the ambient humidity. Therefore, Sanner uses molecular sieves especially when drying inside the packaging under a relative humidity of 10% is required. Nevertheless, the adsorption capacity of molecular sieves increases with rising ambient humidity.

Typical values:

 

In principle, both types of desiccants always remain dry to the touch after saturation with water and can be regenerated by heating, thus saving resources.

How and where are desiccants produced?

Desiccants are mainly produced in Asia and some are refined in Europe.

The starting material of silica gel – usually sodium silicate – is enriched with water to obtain a silicate solution. The addition of an acid, such as sulphuric acid, creates hydrogel by splitting off water. In the next production step, the reaction and solution water is washed out, causing the silicic acid to coagulate and form the silica gel in the following drying step. The characteristics of silica gel can be modified by varying the washing process. The pore diameter is mainly influenced by the washing process.

In summary, the silica gel is synthesized by polycondensation of the hydrogel and a subsequent washing process. Finally, the silica gel is dried in a temperature range of 100 - 400 °C.

Sodium silicates or aluminum salts can also be used as starting material for molecular sieves. Aqueous solutions containing silicon and aluminum compounds are obtained from these minerals and water. As with silica gel, polycondensation is a step in the synthetic production of molecular sieves. During the crystallization of molecular sieve, water molecules bind physically in the pores of the desiccant. These are removed by heating.

Why are desiccants used in pharmaceutical packaging?

Each closed space, including pharmaceutical packaging, has its own climate containing water vapor.
Desiccants are used to reduce moisture in packaging with different procedures. In the case of effervescent tablets, for example, desiccant closures are used to close the tablet tube.

Furthermore, desiccants can be used as capsules or sachets, which are added to bottles or medical products. Also, various closure formats such as screw caps for bottles screw caps for bottles are used.

Alternatively, a desiccant chamber can be developed within the packaging to provide in-situ moisture protection.

A barrier layer (plastic packaging) separates the air inside the packaging along with the packaged goods and the desiccant from the outside climate. This creates a so-called microclimate. It is important that the shell is as impermeable to water vapor as possible. The desiccant dries the trapped air so that no moisture damage is caused to the packaged product.

How does the adsorption of moisture work with desiccants?

Adsorption is a physical process where certain molecules bind to the surface of another suitable substance and accumulate there. The desiccants used by Sanner are specially designed for enrichment with water molecules.

This requires the largest possible specific surface of the desiccant so that as many water molecules as possible can bind to the desiccant.

What is relative humidity?

Relative humidity (RH) is the measurement of the amount of moisture in the air at a given temperature.

It is defined as follows for a given volume of air:

absolute moisture content in the air volume
---------------------------------------------------------------------     x 100%
maximum possible moisture content

There is no defined critical value for relative humidity because each product reacts differently to moisture.

However, the value of approx. 30% relative humidity serves as a rough guide, as many moisture-related problems no longer occur below this value.

How to determine the type and quantity of desiccant required?

Customers’ product requirements for moisture protection or moisture regulation help to determine the suitable desiccant. If the product or packaged goods require a very low moisture content, the use of molecular sieves is appropriate. If the products are less susceptible to moisture, we generally recommend silica gel.

For decades, we at Sanner have been the experts who determine the appropriate type and quantity based on various influencing factors with our Atmo Guard® service to ensure that your product is safely packed and fulfils the required shelf-life.

How is shelf-life calculated for pharmaceutical and healthcare packaging?

The shelf-life depends on the climatic filling conditions, desiccant type and quantity, and the water vapor permeability of the packaging, i.e. the tightness of the system and the material used, as well as the ambient climate. Most products must have a shelf-life of 2 years. The above-mentioned parameters must be considered when designing the desiccant type and quantity in order to ensure that the target humidity level within the packaging is not exceeded throughout the shelf-life. The optimal design of these parameters makes it possible to precisely determine the required water vapor absorption capacity so as not to exceed a specified humidity level within a closed package during storage.

How are the desiccant solutions packaged to maintain functionality?

Sanner desiccant closures, capsules, sachets and packaging with integrated desiccant are usually packed in PE bags with a cardboard box. In accordance with GMP recommendations, our products should be stored inside in a clean and dry place, in the unopened original packaging and at temperatures between 10°C and 30°C, in order to ensure a shelf-life of 6 months until processing. 

In some cases, aluminum composite bags can be chosen to achieve a shelf-life of 3 years.

What would happen if I did not protect my medicine from moisture?

Moisture causes a whole range of undesirable effects. Therefore, you should not neglect the appropriate protection for your moisture-prone products.

Here are some of the more common negative effects associated with excessive moisture:

  • Incorrect result displayed on blood and urine test strips
  • Corrosion of metallic surfaces, e.g. of medical devices
  • Reduced effectiveness of drugs
  • Unpleasant smell
  • Fungal infestation of tablets
  • Decolorization of tablets
  • Chemical changes
  • Smudged tablet surfaces and no longer legible imprint

To be on the safe side, please consult our experts of the Sanner Atmo Guard® Service if your product requires an optimum solution for moisture regulation.

Do you have questions about our products?

Our Sanner desiccant packaging solutions for pharmaceutical, healthcare and medtech applications

Whether you use desiccant capsules, desiccant sachets or integrated solutions  – our high-quality desiccant packaging is especially tight and offers protection against moisture or odors for any requirement.

Drop- In desiccants

Integrated desiccants